Christmas Blessings ~ Santa Claus card *Measurements*

I posted this card back in December 2011.  I have 

been asked several times what the measurements are for the layers 

on this card.. however I had gifted the card to a fellow stamper and didn't have it 

anymore.. this past weekend I sat down and remade the card based off the picture of it 

on my blog.. it took me two attempts.. the first one the red embossed layer wasn't long enough.

Below is my scribbled notes on the paper that I wrote as I worked on the card. 

Measurements are:

Kraft card base 5 1/2" x 8 1/2" scored at 4 1/4" and folded in half

strip with Christmas Blessings sentiment stamped on it and layers:

white: 2" x 4 1/4"

black: 2 1/8" x 4 1/4"

red...  this layer is punched with a scallop on the bottom.. after punching I measured it to be 2 3/8" x 4 1/4"

red embossed panel and layers are:

red embossed pieced: 2 1/4" x 3 3/4"

white: 2 3/8" x 3 7/8"

black: 2 1/2" x 4"

Santa layer:

Stamp is from Delta and is called Santa Collage. I found mine at Michael's but I have seen it at Hobby Lobby as well.

Santa:  2 1/8" x 3 1/8"  I cut then stamp

red: 2 1/4" x 3 1/4" 

black: 2 3/8" x 3 3/8" 

I hope I got them all right.. as I wrote them down.  

I put everything in an image that you should be able to print out.. I've never done this before, so I hope it works right.

SUPPLIES:

card stock: kraft, white, black, red

stamps:  Delta Rubber Stampede Santa Collage (Hobby Lobby carries this at the moment both online and in their stores), Christmas Blessings sentiment from a Hero Arts Greatest Gift stamp set

ink: Ranger Archival Sepia and Versafine Black

accessories:  Scor-Pal, SU Pick A Petal Embossing Folder, SU Scallop Border Punch, Hole Punch, White Brads and Foam Tape

   

thanks for looking ~

have a great airborne day!
God Bless All Our Military.. each and every one of them